Publicité
Les langues disponibles
Les langues disponibles
Pump/Control Access:
20" (50.8 cm) W X
15" (38.1 cm) H
7-1/2" (19.1 cm)
Product Information
Applicable product:
Drop-in rim-style, custom pump
Fixture*:
Bathing well:
Basin area, bottom
46" (116.8 cm) x 20" (50.8 cm)
Basin area, top
55" (139.7 cm) x 22" (55.9 cm)
Weight
54 lbs (24 kg)
To overflow:
Water depth
12-1/2" (31.8 cm)
Capacity
49 gal (185 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58-1/2" (148.6 cm) x 30-1/2" (77.5 cm)
V
Pump: 1-speed
120
Heater: 1 kW
120
Minimum access panel
pump/control (required):
1012642-1-B
1" (2.5 cm)
16"
(40.6 cm)
7-3/4" (19.7 cm)
2-7/8"
(7.3 cm)
K-1106-HN
Hz
A
60
7.5
60
12.5
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected with drain
illustrated. (K-11677 or K-11677M)
60" (152.4 cm)
1/4" (6 mm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
37 lbs/square foot (179 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-in Rim Detail
32" (76.2 cm)
1-1/2"
(3.8 cm)
18-1/8"
(46 cm)
1-1/2" OD
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.
Publicité
