Onkyo TX-8260 Mode D'emploi page 5

> Before Start > Part Names
following order;
BD/DVD#CBL/SAT#PC#GAME#
TVTAPE#CD#PHONO#AM#FM#NET#
BLUETOOTH
17.BASS dial: Adjusts the bass.
18.TREBLE dial: Adjusts the treble.
19.BALANCE dial: Adjusts the balance of the sounds
output from the left and right speakers.
20.BGM 1/2/3/4 buttons: Preset your favorite AM/FM radio
stations (P24).
21.USB jack: A USB storage device is connected so that
music files stored in it can be played. You can also
supply power (maximum 5 V/0.5 A) to USB devices
with a USB cable.
0 When connecting a HDD that requires more than 5
V/0.5 A, connect to the USB port (maximum 5 V/1 A)
on the rear of the unit.
> Install > Initial Setup
 
 
Display
1. The currently selected speaker system lights.
2. Lights in the following conditions.
Ë: When headphones are connected
Z2: ZONE 2 is on.
: When connected via BLUETOOTH
: When connected by Wi-Fi
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network is
not correct.
USB: When "NET" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the USB
is not properly connected.
DIGITAL: Digital signals are input and the digital input selector is
selected.
3. Lights according to the type of input digital audio signals.
4. Lights in the following conditions.
TUNED: Receiving AM/FM radio
FM ST: Receiving FM stereo.
SLEEP: Sleep timer has been set.
AUTO STBY: Auto Stby (P32) has been set.
5. Flashes when muting is on.
6. Speaker/Channel display: Displays the output channel of the speakers.
7. This may light when performing operations with the "NET" input
selector.
8. Displays various information of the input signals.
> Playback
Supplementary information | Advanced Setup | Others
  
 
En 5