Publicité
Fig. 5
6. Thread hexagonal spacers (B8) on trailing arm
bolts. Torque hex spacers to 50 N•m [37 lb•ft]. See
Fig. 6
NOTE: Apply a thread locker product (Loctite 262 or its
equivalent) to hex spacer threads.
Fig. 6
7. Position anchor bracket (B1-B2) under rear
suspension trailing arm and align anchor bracket
bolt holes with hex spacers. See Fig. 7
Fig. 7
8. Secure anchor bracket to suspension trailing using
the provided spacers (B6) and bolts (B5). Torque
bolts to 50 N•m [37 lb•ft]. See Fig. 8
9. Install cover (B3) inside trailing arm using the
provided bolt (B5) and nut (B7). Tighten bolt to 50
N•m [37 lb•ft] of torque. See Fig. 9
5
Fig. 8
Fig. 9
Publicité
