ratiotec Soldi Smart Pro USD Mode D'emploi page 8

All manuals and user guides at all-guides.com
Usage with battery
An optional battery can be used to run the Soldi Smart Pro USD . Before its first use, charge the
battery for a period of 15 hours . If CHARGE is displayed, the battery is still charging . If battery
status is weak, the banknote detector displays LOW .
Identify installed software
To show the used software version, hold down ON/OFF until the display is activated . The software
version of all three currencies will appear on display, finally the device turns off automatically .
Software update
To switch to the update mode, switch off the device and connect it to the PC . Keep pressed all
three switches simultaneously until UPDATE appears in display . For further information as well as
downloading specific files, please visit www .ratio-tec .com .
8