Pioneer PDA-4004 Mode D'emploi page 22

HOW TO ADJUST PICTURE QUALITY
COMMENT REGLER LA QUALITE DE L'IMAGE
EINSTELLEN DER BILDQUALITÄT
4
Remote control
Commande à distance
Fernbedienung
P I CTURE PARAMETER
Main unit
Unité principale
Hauptgerät
ADJUST
5
Remote control
Commande à distance
Fernbedienung
SET
P I CTURE PARAMETER
CONTRAST
BR I GHT.
CLK. FRQ.
Main unit
CLK. PHS.
Unité principale HOR. POS.
VER. POS.
Hauptgerät
I N I T.
SET
SCART RGB
6
Remote control
Commande à distance
Fernbedienung
MENU
Return to the normal screen.
Ë Retour à l'écran normal.
Main unit
Zurück zur normalen Maske.
Unité principale
Hauptgerät
MENU
22
<ARE1357>
En/Fr/Ge
SCART RGB ON
OFF
: CHANGE SET : SET
+ 1 0
– 5
– 0
+ 8
ON
SET : SEL. MENU : EXIT
4
Select SCART RGB ON.
5
Press the SET button.
6
When setting is completed, return to
the normal screen.
NOTE:
With the function set to RGB-1, when inputting
RGB output from a unit with a Euro AV (SCART)
terminal, always set SCART RGB to ON.
With the function set to RGB-1, when inputting
RGB output from a unit with a Euro AV (SCART)
terminal, always set SCART RGB to ON, and set
the Sync Signal Input Impedance switch ( 0 on
page 10) to 75 Ω .
When inputting a signal other than RGB output,
always set SCART RGB to OFF.
Before you perform the above settings, always first
turn OFF the power to the unit connected to RGB-
1. If you perform the above settings with the power
to the unit connected to RGB-1 remaining ON, in
some cases there may be nothing on the screen
or remote control operation will be ineffective.
If this occurs, turn OFF both the main unit
ton and the power to the unit connected to RGB-1,
then perform resetting.
but-