Adjusting Setup Items - Set; Using Optional Equipment; Auxiliary Audio Equipment - Sony CDX-GT100 Mode D'emploi

Masquer les pouces Voir aussi pour CDX-GT100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Adjusting setup items — SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the volume control dial to
select the setting (example "ON" or
"OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
"
" indicates the default settings.
z
CLOCK-ADJ (Clock Adjust) (page 4)
BEEP
To set "BEEP-ON" (
) or "BEEP-OFF."
z
AUX-A*
1
(AUX Audio)
To turn the AUX source display "AUX-A-ON"
(
) or "AUX-A-OFF" (page 7).
z
SUB/REAR*
1
To switch the audio output.
– "SUB-OUT" (
): to output to a subwoofer.
z
– "REAR-OUT": to output to a power amplifier.
DIM (Dimmer)
To change the brightness of the display.
– "DIM-ON": to dim the display.
– "DIM-OFF" (
): to deactivate the dimmer.
z
DEMO*
1
(Demonstration)
To set "DEMO-ON" (
z
LPF*
2
(Low Pass Filter)
To select the subwoofer cut-off frequency: "LPF
OFF" (
), "LPF125Hz" or "LPF 78Hz."
z
*1 When the unit is turned off.
*2 When the audio output is set to "SUB."
) or "DEMO-OFF."

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
Connecting cord*
* Be sure to use a straight type plug.
Adjusting the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE) repeatedly until "AUX
FRONT IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Press the select button repeatedly until "AUX"
appears, and rotate the volume control dial to
adjust the volume level.
AUX
AUX
(not supplied)
7

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Cdx-gt10w

Table des Matières