Kenwood BLM05 Mode D'emploi page 6

care & cleaning
Always switch off, unplug and
l
dismantle before cleaning.
Never let the power unit, cord or
l
plug get wet.
Always wash immediately after
l
use.
Do not let food dry onto the blade
l
assembly as this will make cleaning
difficult.
The bottle and lid can be washed
l
in your dishwasher.
power unit
Wipe with a damp cloth, then dry.
l
blade assembly
Unscrew the blade assembly
l
from the bottle. Then remove the
blade unit by pushing up from
underneath.
Care should be taken when
l
removing the blade unit from
the blade assembly.
1 Do not touch the sharp blades -
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Do not immerse the
blade assembly in water.
2 Leave to dry upside down away
from children.
bottle and dispensing lid
Wash the lid by hand, rinse with
clean water and dry.
service and customer
care
If you experience any
l
problems with the operation
of your appliance, before
requesting assistance visit
www.kenwoodworld.com.
Please note that your product
l
is covered by a warranty, which
complies with all legal provisions
concerning any existing warranty
and consumer rights in the country
where the product was purchased.
If your Kenwood product
l
malfunctions or you find any
defects, please send it or bring
it to an authorised KENWOOD
Service Centre. To find up to date
details of your nearest authorised
KENWOOD Service centre visit
www.kenwoodworld.com or the
website specific to your Country.
Made in China.
l
6