Kenwood BLM05 Mode D'emploi page 5

to use your blender
1 Add ingredients into the bottle.
For best results, it is advisable
to always add ice and frozen
ingredients last. Ingredients can be
added without exceeding the max.
level indicated on the bottle.
When adding frozen ingredients
l
such as frozen fruit, yoghurt, ice
cream or ice do not blend more
than 60g or 3 ice cubes.
2 Hold underside of the blade unit
③ and lower onto the bottle ②,
blades down, and then rotate
clockwise to lock ❶.
3 Shake to distribute the ingredients.
4 Fit the Blender on the power unit
④. Align the tabs on the bottle
with the grooves on the power unit
❷, and then rotate clockwise until
a "click" is heard ❸.
5 Start the blender by pressing the
on/off button ⑥. Release the
button to stop operation.
Allow the ingredients to blend until
l
smooth.
6 Once the required consistency is
reached, disconnect the plug from
the mains outlet. Wait until the
blades are stopped and rotate the
bottle counter-clockwise to remove
it from the power unit.
7 Turn the bottle upright again and
place it on a flat surface. Remove
the blade unit by unscrewing it.
8 Fit and lock the lid by turning
clockwise.
When you want to drink, simply flip
l
open the lid cover ❹. The drink
can be consumed straight from the
bottle.
hints & tips
When the bottle is filled up the
l
max. capacity, the drink amount
contained is approximately two
servings.
If you do not intend to consume
l
your drink immediately, keep it
refrigerated.
Ensure your drink is thin enough
l
to be able to drink from the
dispensing lid. To make a thinner
drink add more liquid.
Once your drink has reached the
l
required consistency, it is possible
to press the on/off button for pulse
blending and ensure all ingredients
are thoroughly mixed. Use the on/
off button to operate the Blender
intermittently to control the drink
consistency.
After blending, some drinks may
l
not be completely smooth due
to seeds or the fibrous nature of
ingredients.
Some drinks may separate on
l
standing, therefore it is best
to drink them straight away.
Separated drinks should be stirred
before drinking.
important
Do not blend more than 3 ice
l
cubes (approx. 60g) at a time.
Never blend dry ingredients (e.g.
l
spices, nuts) or run the Blender
empty.
Do not use the Blender as a
l
storage container whilst on the
power unit.
Some liquids increase in volume
l
and froth during blending e.g. milk,
so do not overfill and ensure the
blade assembly is correctly fitted.
To ensure long life of your Blender,
l
never run it continuously for longer
than 45 seconds.
Never blend food that has formed
l
a solid mass during freezing, break
it up before adding to the bottle.
Never blend more ingredients than
l
the max. capacity indicated on the
bottle.
When the dispensing lid is fitted
l
always keep the travel bottle
upright.
5