ECOFOREST ecoGEO HP Serie Manuel D'installation page 45

Description
Brine pump
Production pump
DHW production
DHW Recirculation
Pool production
Active cooling production
Passive cooling production
Brine auxiliary pump
Cooling auxiliary pump
5.7. Simultaneous production
In installations with simultaneous production, the 0-10Vdc regulation signals of the cooling and heating circuit circulator pumps are
used to control the modulating 3-way valves that bypass to the support collector. As a result, only the digital activation signal is
used for the circulator pumps.
Description
Cooling pump
Heating pump
Cooling valve
Heating valve
Table 1.4. Terminal blocks for installations with simultaneous production.
5.8. DG1 – SG5 Outlet Units
The heat pump can control a direct outlet unit (DG1) and four outlet units with mixture (SG2, SG3, SG4 y SG5). Unit activation can
be controlled according to heating or cooling demand. In addition, the units with mixture can measure the unit's outlet
temperature and generate a regulation signal for the 3-way modulating valve.
All manuals and user guides at all-guides.com
Digital output
Analogue output
Digital output
Analogue output
Digital output
Analogue input
Digital output
Analogue input
Digital output
Digital output
Digital output
Digital output
Digital output
Table 1.3. Connection terminals for external production equipment.
Digital output
Digital output
Analogue output
Analogue output
Installer manual ecoGEO HP
Signal
Activation 230Vac / 8A maximum
Regulation 0-10Vdc
Activation 230Vac / 8A maximum
Regulation 0-10Vdc
Activation 230Vac / 8A maximum
NTC 10K 25ºC Probe
Activation 230Vac / 8A maximum
NTC 10K 25ºC Probe
Activation 230Vac / 8A maximum
Activation 230Vac / 8A maximum
Activation 230Vac / 8A maximum
Activation 230Vac / 8A maximum
Activation 230Vac / 8A maximum
Signal
Activation 230Vac / 8A maximum
Activation 230Vac
Regulation 0-10Vdc
Regulation 0-10Vdc
44
Type Connector
DO1
AO1
DO2
AO2
DO3
AI12
DO4
AI19
DO5
DO11
DO12
DO14
DO15
Type Connector
DO1
DO2
AO1
AO2