ECOFOREST ecoGEO HP Serie Manuel D'installation page 30

2. Heat pump installation
2.1. Transport and handling
The heat pump must be transported vertically and not exposed to adverse weather conditions. It can be lain carefully on its rear
side to facilitate transportation to the installation site.

Do not tilt the heat pump more than 45º, since this could impair proper equipment operation.

Due to its heavy weight, the heat pump should be handled by two workers using a forklift for heavy
NOTE
loads.
2.2. Dimensions and connections
The overall dimensions and hydraulic connections of the ecoGEO HP heat pumps are described below.
848
765
185
6
1
2
186
765
Figure 1.1. Overall dimensions and hydraulic connections (Amounts in mm).
All manuals and user guides at all-guides.com
5
4
3
29
Installer manual ecoGEO HP
950