Publicité
Les langues disponibles
Les langues disponibles
Side Hinge Door Alignment Procedure
Open the door to
approximately 135 °.
Using a Torx T-20 star-
head screwdriver,
loosen the 3 screws
(A) on the lower hinge
by 1 to 2 full turns.
Note: All adjustment is
made with the lower
hinge only. The upper
hinge is fixed in place
and cannot be
adjusted.
__
3.
Using a #2 philips
head screwdriver, turn
the cam (B) right or left
to adjust the hinge
position in the desired
direction.
Note: lmm of hinge
movement (left or
right) will move the
door up or down
approximately 1.5mm
at the door catch.
4.
Re-tighten the screws
before closing the
door to test. Be careful
not to overtighten.
5.
Check for proper door
alignment. Repeat
adjustment procedure
as necessary.
English 14
9000989321 Rev A
Publicité
