Black & Decker FX810 Mode D'emploi page 9

Useful advice
• Place the appliance on a clean, flat work
surface.
• Connect the appliance to a suitable
electrical supply. Rotate the control knob
(J) to the required speed.
• When processing is complete return the
control knob to the o (0) position.
• Once the blade has come to a complete
stop, lift the jar / bowl from the blender
body (I).
• Remove the lid and pour the ingredients
into a suitable container.
Note: Ingredients can be added by inserting
them through the hole left when the filler
cap (S) or pushers (A), (B) or (W) are
removed.
Warning! Never operate the Blender
without the lid fitted.
Warning! Never operate the Food processor
without the lid fitted.
Maintenance & cleaning
• Switch the appliance off, remove the
plug from the wall socket and wait until
the blade has stopped rotating.
• The appliance is easier to clean if you do
so immediately after use.
• Do not use abrasive cleaning agents,
scourers, acetone, alcohol etc. to clean
the appliance.
• All removable parts can be cleaned with
a cleaning brush in warm water with
some washing-up liquid and rinse them
under the tap.
All manuals and user guides at all-guides.com
• Remove the dirty parts from the motor
unit. Clean the motor unit with a damp
cloth.
• Never immerse the motor unit in water
nor rinse it under the tap.
Technical data
Voltage
Supply
Power
Weight
ENGLISH
FX810
220 – 240 Volts
50/60 Hz
800W.
5.03 Kg.
9