Publicité
Les langues disponibles
Les langues disponibles
Optional Installation
These connections are optional. Your UPS will function
properly without these connections.
1
USB and RS-232 Serial
Communications
Use the included USB cable (see
cable (see
your computer to the communication port of your
UPS. Install on your computer the Tripp Lite
PowerAlert Software appropriate to your computer's
operating system.
Telephone/Network Protection Jacks
2
Your UPS has jacks that protect against surges over a
telephone line or a network dataline. Using telephone
or network data cables, connect your wall jack to the
UPS jack marked "IN." Connect your equipment to
the UPS jack marked "OUT." Make sure the
equipment you connect to the UPS's jacks is also
protected against surges on the AC line.
Not compatible with PoE (Power Over Ethernet) applications.
Get user manuals:
See SafeManuals.com
1a
) and/or DB9 serial
1b
) to connect the communication port on
1a
1b
2
4
Publicité
