Worx WX314 Mode D'emploi page 11

PLuG REPLACEMENT (uK &
IRELAND ONLy)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTaNT
The wires in the mains lead are colored in
accordance with the following code:
blue – Neutral
brown – Live
As the colors of the wires in the mains lead
of thisappliance may not correspond with the
coloured markings identifying the terminals
in your plug, proceed as follows. The wire
which is coloured blue must be connected to
the terminal which is marked with N. The wire
which is coloured brown must be connected
to the terminal which is marked with L.
waRNINg: Never connect live or
neutral wires to the earth terminal of the
plug. Only fit an approved BS1363/A plug and
the correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Impact Drill
All manuals and user guides at all-guides.com
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
DECLARATION OF
CONFORMITy
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description wORx Impact Drill
Type wx314 wx314.1 wx314.2(300-
329-designation of machinery,
representative of Impact Drill)
Function boring holes in various materials
Complies with the following directives,
2006/42/EC
2004/108/EC
2011/65/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 60745-1
EN 60745-2-1
The person authorized to compile the
technical file,
Name: Russell Nicholson
address: Positec Power Tools (Europe)
Ltd, PO box 152, Leeds, LS10 9DS, UK
2014/05/19
Leo Yue
POSITEC Quality Manager
11
EN