Télécharger Imprimer la page

Ergon BA3 Evo Enduro Mode D'emploi page 15

Sac à dos
Masquer les pouces Voir aussi pour BA3 Evo Enduro:

Publicité

Les langues disponibles

Les langues disponibles

ERGON BIKE ERGONOMICS
Shortening the belts
The belts can be shortened to the desired length if necessary.
Afterwards, use a match or a lighter to melt the edges of the cut
to prevent fraying.
Warning: BEFORE shortening the belts, be sure the
backpack size is correctly adjusted (see page 12-13) and
that you know the belt length you actually need! Belts that
have been overshortened cannot be considered a reason
for return of the product! After shortening, the product
cannot be replaced!
Tips for packing the bag and weight distribution
Pack heavy articles first (so they are at the bottom of the pack). Only pack lightweight items (such as a helmet or rain jacket) using
the helmet holder.
Cleaning and maintenance
Clean and dry your pack after each use to keep it in top condition. Use only luke warm water and a soft sponge. Wipe the pack
internally with a damp cloth – this protects the coating on the fabric. Do not use hot water, bleach, washing up liquid, solvents,
paint or stain removers. For stubborn stains use a detergent free soap. Use of solvents on your backpack will damage the water
resistant coating irreparably. Failure to follow these instructions will result in an invalidated warranty. To dry, hang the open pack in
a cool, dry, well ventilated place out of direct sunlight. The backpack may not be machine washed or dried.
Note
The backpack is water resistant, however not 100% waterproof. We recommend packing electronics in a separate waterproof
container.
Storage
Never put an Ergon backpack away wet or dirty. This could lead to mould – which can damage the fabrics and cause unpleasant
smells. Store the pack in a cool, dry place out of direct sunlight.
Warranty
Ergon warrants to the original retail purchaser that this product is free from defects in material and workmanship for (2) two years
from the date of original retail purchase. If you have any cause to return the product please take it to a specialist bicycle retailer
together with proof of purchase. The product warranty does not cover modified products, or products used in a way not intended
or set out in this document. Failure to follow all instructions will invalidate the warranty.
Please see the current full warranty policy at www.ergonbike.com/warranty
or scan QR-code for details.
16
EN
+

Publicité

loading