Sony XAV-AX3250 Mode D'emploi page 6

 Sound select keys
Changes the sound.
  (standby)
Turns the unit in standby mode (USB charging is
still available). To resume, press any buttons.

(monitor off)
Turns off the monitor. When the monitor is
turned off, touch any part of the display to turn it
back on.

(EXTRA BASS)
Changes the EXTRA BASS setting.

(EQ10/subwoofer)
Changes the EQ10/subwoofer setting.
6
GB
Basic Operations
Pairing with a BLUETOOTH Device
When connecting a BLUETOOTH device for the first
time, mutual registration (called "pairing") is
required. Pairing enables this unit and other devices
to recognize each other.
1
Press HOME, then touch [Settings] 
[Bluetooth]  [Bluetooth Connection]  [ON]
 [Pairing].
flashes while the unit is in pairing standby
mode.
2
Perform pairing on the BLUETOOTH device
so it detects this unit.
3
Select your model name shown on the
display of the BLUETOOTH device*.
When pairing is made,
* If passkey input is required on the BLUETOOTH device,
input [0000].
Canceling the Demonstration
Mode
1
Press HOME, then touch [Settings].
2
Touch [General], then touch [Demo] to set to
[OFF].
3
To exit the setup menu, touch
twice.
Updating the Firmware
To update the firmware, visit the support site, then
follow the online instructions.
URL: https://www.sony.eu/support
Note
During the update, do not remove the USB device.
stays lit.
(back)