Publicité
Les langues disponibles
Les langues disponibles
4) The operators must take the seedlings from the trays
and place them in the drilling cups which, alterna-
tively, will be positioned at the top of the dispenser.
B
UN41 0086GF
Planting through plastic mulch mode
The seedlings must be planted in soil which has been
finely tilled with a harrow or hoeing machine, lightly
compacted on the surface, and covered with a plastic
mulch sheet.
The mulch sheet must be laid out suitably taut with the
soil ridged up along the side edges.
We recommend you dampen the root ball well (but with-
out causing dripping) to help the dispenser plant the
seedling and ensure the plant is more likely to take root.
Do not work on extremely spongy spoil, or extremely
compact soil, nor on very wet ground, as these condi-
tions would all affect planting quality negatively.
During planting, the work vehicle's driving wheels must
grip the ground at all times and the tractor lift must be
fully lowered.
English language
INFORMATION FOR USE
5) The operators on the work vehicle must check the
planting quality constantly. In the event of anoma-
lies, stop the tractor moving forwards and adopt cor-
rective measures (see "Information on adjustments"
and "Troubleshooting" - pages 16 and 29).
E
F
Preliminary operations
Before starting the planting, the following operations
must be carried out.
1) Check that the plant spacing is correct. The plant
spacing depends on the number of drilling cups fit-
ted on the dispenser and/or the number of teeth on
the pinion that transmits the motion to the dispenser
(see "Plant spacing range" - page 6).
2) Check that the row spacing is correct (see "Adjusting
the row spacing" - page 18).
3) Check that the plastic mulch pressing skids (G) are fit-
ted, and if they are not, proceed by fitting them (see
"Installing the plastic mulch pressing skids" - page
15).
4) Assess the soil consistency in order to adjust the ar-
rangement of the packing wheels (see "Adjusting the
packing wheels" - page 16).
23
C
A
Use and maintenance
6
D
A
Publicité
