Télécharger Imprimer la page

Cotek SP Serie Mode D'emploi page 5

Masquer les pouces Voir aussi pour SP Serie:

Publicité

Les langues disponibles

Les langues disponibles

EN
1-2. Other Safety Notes
 Upon receipt, examine the carton box for damage. If you have found any
damage on the carton box please notify the company you purchased
this unit from.
 Do not operate near water or in excessive humidity.
 Do not open or disassemble the inverter, and warranty may be voided.
 The DC side connections should be firm and tight.
 Grounding: Reliable grounding should be maintained.
 Do not drop a metal tool on the battery. The resulting spark or
short-circuit on the battery or on the other electrical part may cause an
explosion.
 Install the inverter in a well-ventilated area. Do not block the front air
vents, or the rear air exhausts of the unit.
 Wiring: Adequate input power must be supplied to the inverter for proper
use; correct wiring sizes must be ensured.
 Mount the inverter such that the fan axis is horizontal.
 Do not operate the inverter close to combustible gas or open fire.
 Do not operate appliances that may feed power back into the inverter.
Temperature: The inverter should be operated in an ambient
temperature range of -20℃ to 40℃ otherwise the output efficiency may
be affected. Air flow to the inverter must not be blocked.
4
All manuals and user guides at all-guides.com

Publicité

loading

Ce manuel est également adapté pour:

Sp-700Sp-1000Sp-1500Sp-2000Sp-3000Sp-4000