Kohler K-3048 Guide D'installation page 3

1. Install the Lavatory
CAUTION: Risk of personal injury or product damage. Cast
iron lavatories are very heavy. Get help lifting the lavatory into
place.
Install the faucet and drain to the lavatory. Refer to the faucet and
drain manufacturer's instructions.
Run a 1/4" (6 mm) continuous bead of silicone sealant around the
top of the vanity, as illustrated.
IMPORTANT! To ensure proper installation, get assistance aligning
and lifting the lavatory into place.
IMPORTANT! The back edge of the lavatory must be flush against
the back of the vanity and equal left and right overhang on each
side of the vanity.
Position the lavatory on top of the vanity.
Verify that the lavatory is level. If the lavatory is not level, gently
press down on the lavatory.
Wipe away excess silicone sealant.
Allow the silicone sealant to set according to the sealant
manufacturer's instructions.
Connect the water supply and the drain assembly.
Run water into the lavatory and check for leaks.
Kohler Co.
All manuals and user guides at all-guides.com
Lavatory
Apply a 1/4" (6 mm)
bead of silicone sealant
on vanity.
Vanity
3 1049896-2-B