Putting The Grandioso C1X Into Standby; Dimmer; Muting The Output - Esoteric C1X Mode D'emploi

Basic operation (continued)
Putting the Grandioso C1X into standby
There might be noise from the speakers if the unit is turned off sud-
denly. Follow the steps below to put the unit into standby.
1
If a connected device is playing back, stop
playback.
2
Turn the power amplifier off.
3
Press the STANDBY/ON button to put the
Grandioso C1X into standby mode.
4
Turn off the connected input source device.
18

Dimmer

Use this to adjust the brightness of the main unit's display.
DIMMER 3
c
DIMMER 2 (normal brightness)
c
DIMMER 1
c
(off )
o Even when the dimmer is off, the display will light at normal
brightness for a few seconds when you press a button or turn a
knob.
o Even when set to DIMMER 1 or off, setting menus and error mes-
sages will be shown with normal brightness (DIMMER 2).

Muting the output

Press the MUTE button to temporarily mute the sound. Press again to
restore the volume setting.
o When muted, "MUTE" blinks on the screen.
o You can also restore the sound by pressing the VOLUME buttons
(+/−) or by turning the VOLUME knob.