Rational iCombi Pro Manuel D'installation page 5

All manuals and user guides at all-guides.com
4 | Installation
7 Holder drain valve
8 Drain pipe
9 Drain valve with handle
10 Connection pipe
11 Double socket
12 Silicon seal double socket
13 Pipe holder rear wall
14 Silicon seal HT pipe
15 Bracket for drain valve
16 Copper seal
17 Collection tray
18 Pipe collection tray
19 Plug for cooking cabinet, with fixing
and chain
20 Screw connection with funnel open-
ing
21 Drain fitting
4 Installation
4.1 Preparing the stand
Stand with rear wall:
Break out the perforation for the plate on
the rear wall of the stand [
Stand without rear wall [
1. Hook the retaining plate on the rear
side of the stand on the table edge.
2. Tighten the 2 screws on the retaining
plate.
4.2 Mounting the integrated fat
drain
Mounting the drain valve and drain pipes
1. Seal the threads of the two pipe pieces
for the drain valve with teflon tape
[ Figure 04].
80.51.389_iCombi Pro-iCombi Classic_IFA TG_IM_V01_US-nord
2. Mount the two parts of the holder on
3. Turn the tube angle so that it is
4. Mount the pipe seal on the pipe socket
5. Join the pipes on the rear wall of the
6. Guide the piping into the stand
7. Push the drain valve into the top rail of
8. Push the piping into the pipe sleeve of
9. Tighten the clamp screws on the drain
10. Place the front fat collection canister in
Figure 02].
Figure 03]:
11. Insert the drain pipe in the front fat
12. Turn the drain pipe so that the pin
13. Push the fat collection tray into the
14. Guide the piping in the cooking cabi-
the drain valve with the tube angle and
the connecting pipe [
mounted at a 90° angle to the holder.
in the rear wall of the device
[ Figure 06].
device [ Figure 07].
[ Figure 08].
the stand [ Figure
the drain valve [ Figure
valve holder [ Figure
front of the stand and the rear fat col-
lection canister in the stand
[ Figure 12]. The rear canister must
be positioned in the stand so that the
front fat collection canister can be
placed in front of it after further pre-
liminary work.
collection canister and in the tube an-
gle [ Figure 13].
locks in the tube angle [
bottom slot of the device
[ Figure 15].
net into the fat collection tray
[ Figure 16]. Fix the plugs on the
funnel in the cooking cabinet.
en-US
Figure 05].
09].
10].
11].
Figure 14].
5 / 16