Rational iCombi Pro Manuel D'installation page 4

en-US
1 Information on this manual
This document is a preliminary version of
the installation instructions. Please note
the respective version and date.
This manual describes the setup of the in-
tegrated fat drain for the devices:
LM1: iCombi Pro (iCP) 6 half size - 10
n
full size
LM2: iCombi Classic (iCC) 6 half size -
n
10 full size
This manual is a supplement to the installa-
tion manual for iCombi Pro / iCombi Clas-
sic. Read this manual before carrying out
the setup. The manual enables safe han-
dling of the devices and correct installa-
tion.
The images in this manual are examples
only and may differ from the kit.
All information from the installation man-
ual for iCombi Pro / iCombi Classic ap-
plies accordingly.
2 Safety
WARNING
Danger of burns from hot drain pipes
The pipes of the fat drain can become
extremely hot while the device is in
operation.
Do not touch the drain pipes during
n
operation.
If you are not using the integrated
n
fat drain, seal the funnel in the
cooking cabinet with the plug
provided.
4 / 16
All manuals and user guides at all-guides.com
80.51.389_iCombi Pro-iCombi Classic_IFA TG_IM_V01_US-nord
1 | Information on this manual
NOTE
Incorrect installation of the drain pipe
To prevent the fat from flowing back
into the device, align the drain pipe to
create a slight slope.
NOTE
Leaking connections
To avoid leaking connections on the
drain valve, use a new teflon tape to
seal the pipe pieces when working on
the drain valve.
3 Product description
NOTE
The integrated fat drain can not be
retrofitted on standard devices.
The integrated fat drain for tabletop de-
vices is set up with this kit.
The following kit is available for tabletop
devices:
Integrated fat drain kit
For device size 6-1/1 -
10-2/1
Scope of delivery integrated fat drain for
tabletop devices [
1 Sealing collar wastewater
2 Pipe elbow
3 Pipe
4 Pipe
5 Canister 10 l
6 Cone handle
Article
number
60.75.085
Figure 01]: