DETOMASO PARMA Manuel page 17

All manuals and user guides at all-guides.com
Calibration (reset) of the Chronograph
(only after battery change or faulty handling)
1. Pull out the crown to position 2. If button B is pressed and held, you will get
to the calibration mode of the chronograph function.
2. Press button B to set the minute hand to the zero position. A short push will
give you a step by step advance whereas the hand can be advanced rapidly
by continuously pushing this button.
3. Press button "A" to set the second hand of the chronograph to the zero
position. A short push will give you a step by step advance whereas the hand
can be advanced rapidly by continuously pushing this button.
Attention: When calibrating the minute hand the second hand will also move.
In order to calibrate both hands it is crucial to stick to the
sequence stated which is minute before second.
4. Push the crown back into its normal position. The chronograph has now
been successfully calibrated.
EN
17