dB Technologies entertainment system ES 503 Mode D'emploi page 30

English
Advanced Settings
Here are present some useful features of the ES  system.
Go to: Menu Advanced Setting
SUB'S LEVEL: Es  is provided of an independent sub's level
control. Select this first item and through the rotary knob adjust
the level as preferred
MIC FILTER: This filter avoid specific resonance or feedback. It
works on mic input (only in Mic Mode). Works on main output
and Aux output.
Clicking on this item it's possible to insert a High pass filter
(Hz to  Hz) and a notch filter (Hz to  Hz)
AUX FILTER: If there are some feedback due a too much
pressure from the monitor, it's possible set an additional notch
filter. It works only in Aux mode. The main output will not be
affected by this filter. (Hz to  Hz)
Save/Recall
Go to: Menu
Here is possible to save and load five different setups.
Option Menu
Go to: Menu
Password
Password
Contrast
Stand-By
Stand-By
Info
Exit
We provide a "Superuser Password" if the inserted password will be

All manuals and user guides at all-guides.com
Save/Recall
Option:
Enable or Disable the request of the password
On-OFF
Show and set the password
Change the Oled contrast
This option allows to choose if the OLED display
will be turned off after a period of inactivity.
This option allows to choose the delay before the
OLED display is turned off. Once the display is
turned off, you can restore it by pressing any of the
navigation buttons
Show the ES info as Dsp and Firmware version
Back to previous menu
lost
QRD