Bluetooth - Renkforce 1285921 Mode D'emploi

e) Bluetooth
®
The device supports Bluetooth
with a compatible device.
Switch to "Bluetooth":
• To switch to operating mode "Bluetooth", scroll through the main menu to the left or right with one of the
two arrow buttons C11 and C12 or A7 and A9, until "Bluetooth" is shown in the middle of the display. Then
push the button C13 or A8 to switch to the function.
• Alternatively, you can push the button "MODE" C7 or A10 until the operating mode "Bluetooth" is dis-
played.
Media Center using a compatible device:
• After you have opened the function, Bluetooth
• Next, you need to connect e.g. your Smartphone or Tablet to the internet radio.
For this, enable Bluetooth
vices.
Connect or couple e.g. your Smartphone to the Bluetooth
has been established, the internet radio will play a brief sound.
Now you can play a piece of music on your Smartphone and simply switch to the Internet Radio as output
device during playback. Observe the respective operating instructions of the operating system used.
You can control the Media Center comfortably from your Smartphone. You can additionally control the
volume at the internet radio as well. Use the buttons C14 and C15 on the remote control or the dial switch
A8 at the device.
Leaving the operating mode "Bluetooth":
• To leave the mode again, push the C6/A6 button to switch to the main menu.
• Alternatively, you may simply switch to a different operating mode with the button "MODE" C7/A10.

• Bluetooth

is switched off automatically. As long as you have not disconnected your device from the
®
radio, the connection will be established automatically as soon as you switch back to the mode "Blue-
tooth" on the internet radio.
as well. This means that you can play back music right on the internet radio
®
®
on your device and then open the Bluetooth
®
is enabled automatically.
-device "Renkforce IR2". Once the connection
®
configuration to scan for de-
®
57