Husqvarna 122C Manuel D'utilisation page 17

The engine starts but stops again
Check Possible cause
Fuel tank Incorrect fuel type.
Air filter The air filter is clogged.
• Always allow the product to cool down before
storage.
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel before transportation or before long-
term storage. Discard the fuel at an applicable
disposal location.
Technical data
Engine
3
Cylinder displacement, cm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Power / Max. engine output, acc. to ISO 8893, kW/hp @ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, mm
Fuel system
Fuel tank capacity, l/cm³
Weight
Weight without fuel, cutting attachment and guard, kg
941 - 010 - 25.07.2023
Transportation and storage
•
•
•
•
Technical data
Procedure
Empty the fuel tank and fill it with correct fuel.
Clean the air filter.
Attach the transport guard during transportation and
storage.
Remove the spark plug cap from the spark plug.
Attach the product during transportation. Make sure
that it cannot move.
Clean and do servicing on the product before long-
term storage.
122C
21.7
2900
7200
7200
0.6/0.8 @ 7800
Yes
No
HQT-4 672201
0.5
0.3/300
4.4
122LK
21.7
2900
9100
6232
0.6/0.8 @ 7800
Yes
No
HQT-4 672201
0.5
0.3/300
4.8
17