Wolf WF Serie Guide D'installation Et D'utilisation page 10

WOLF WF FRYERS
for Moveable Gas Appliances, CAN/CGA-6.16, and a quick-disconnect device that
complies with the Standard for Quick-Disconnect Devices for Use with Gas Fuel,
ANSI z21.41 or Quick-Disconnect Devices for Use with Gas Fuel, CANI-6.9.
w
When installing a quick disconnect you must also install a means for limiting the
movement of the fryer. This restraining device will prevent the gas line or quick
disconnect from being strained. The restraining device should be attached to the
cutout on the back panel. See illustration for location. If disconnection of the
restraining device is necessary for service or cleaning, reconnect the restraining
device after the fryer is placed back into its original position.
w
The fryer must be installed with a connector (not supplied by Wolf) complying with
the above codes.
w
The fryer must be installed with restraining means to guard against transmission
of strain to the connector. See illustration.
w
The fryer must be installed with the casters provided.
w
If the restraint is ever to be disconnected, first turn the gas supply off.
WF Series Fryers
-10-
WF-53700 Rev. A (7-23)