AEG SKS41200S0 Notice D'utilisation page 30

30 www.aeg.com
Hb
8. NOISES
There are some sounds during normal
running (compressor, refrigerant circula-
tion).
8 mm
K
Ha
Hb
Hd
Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of
the door where the nail must be fitted
(K).
Place the small square on the guide
again and fix it with the screws supplied.
Align the kitchen furniture door and the
appliance door by adjusting the part
(Hb).
Press the part (Hd) on the part (Hb).
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to
the cabinet.
• The door opens and closes correctly.