AL-KO GTLi 18V Mode D'emploi page 15

Product description
Automatic tip
An automatic tip function is equipped in the spool
head, allowing the cutting line to be extended
while the motor is running.
Safety and protective equipment
Child protection
The hole (5 mm) on the motor protection switch is
provided for a padlock*. The padlock prevents the
appliance from being switched on inadvertently.
* Not included in the scope of delivery
CAUTION!
Risk of injury!
Safety and protective devices should not
be disabled.
Designated use
This appliance is intended for trimming a lawn in
non-commercial applications. Any use not in ac-
cordance with this designated use shall be regar-
ded as misuse.
This tool is not intended to be used by people
(including children) who have restricted phy-
sical, sensory or mental capabilities; neither
is it intended to be used by people lacking ex-
perience and/or knowledge unless they are
supervised by someone who is responsible
for safety, or receive instructions from this su-
pervisory person in how to operate the tool.
Children should be supervised in order to
make sure that they do not play with the tool.
CAUTION!
The equipment is intended for domestic
use only.
PRODUCT OVERVIEW
The product overview (1) provides an overview of
the appliance.
1-1 Upper hand grip
1-2 Switch with child protection
1-3 Battery
1-4 Battery lock
1-5 Charger with mains plug
1-6 Auxiliary hand grip with tip lever
1-7 Holder with additional spool
440084_a
All manuals and user guides at all-guides.com
1-8 Telescopic handle
1-9 Upper guide sleeve
1-10 Lower guide sleeve
1-11 Locking button for cutter head
1-12 Cutter head with motor
1-13 Plant protection bar
1-14 Guide wheel
1-15 Guard plate with line cutter
1-16 Spool
Lithium-ion battery
i
1.3 Ah (lithium-ion)
approx. 25 min
Input: 100-240 V ~ 50/60 Hz 14 W
Output: 20 V
SAFETY INSTRUCTIONS
CAUTION!
The cutting tools continue to rotate even
after the motor has been switched off.
Wear suitable clothing, eye protection and gl-
oves
Never allow children or uninstructed persons
to operate or maintain the machine. Local re-
gulations may specify the minimum age of
people operating the machine
18 V
200 min
Charger
500 mA
5 - 45 °C
15