Black & Decker PRO Serie Mode D'emploi page 7

d) Use special care when working corners, sharp edges
etc. Avoid bouncing and snagging the accessory.
Corners, sharp edges or bouncing have a tendency to
snag the rotating accessory and cause loss of control or
kickback.
e) Do not attach a saw chain woodcarving blade or toothed
saw blade. Such blades create frequent kickback and
loss of control.
Safety Warnings Specific for Grinding Operations
a) Use only wheel types that are recommended for your
power tool and the specific guard designed for the
selected wheel. Wheels for which the power tool was not
designed cannot be adequately guarded and are unsafe.
b) The guard must be securely attached to the power tool
and positioned for maximum safety, so the least amount
of wheel is exposed towards the operator. The guard
helps to protect operator from broken wheel fragments
and accidental contact with wheel and sparks that could
ignite clothing.
c) Wheels must be used only for recommended
applications. For example: do not grind with the side of
cut-off wheel. Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to these wheels
may cause them to shatter.
d) Always use undamaged wheel flanges that are of correct
size and shape for your selected wheel. Proper wheel
flanges support the wheel thus reducing the possibility of
wheel breakage. Flanges for cut-off wheels may be
different from grinding wheel flanges.
e) Do not use worn down wheels from larger power tools.
Wheel intended for larger power tool is not suitable for
the higher speed of a smaller tool and may burst.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These are:
– Impairment of hearing
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
All manuals and user guides at all-guides.com
Tool Symbols
The following symbols are printed on the tool:
Position of date barcode (fig. 1)
The date barcode (n), including the year of manufacturing, is
printed on the tool housing.
E.g.:
Package Content
This product package includes:
1 Angle grinder
1 Guard
1 Flange set
1 Spanner
1 Handle
1 Instruction manual
•
•
Description (Fig. 1)
a. ON/OFF switch
b. Spindle lock
c. Guard
– Risk of dust from hazardous substances.
Read the instruction manual before use.
Please wear hearing protectors.
Please wear eye protection equipment.
Year of manufacturing
Check the tool, parts, and accessories to see if they are
damaged during transportation.
Take a few moments to read and understand this
manual before using the tool.
Warning! Never modify the power tool or any
part of the tool, otherwise it may cause
damage to the tool or result in personal injury.
ENGLISH
2013 XX JN
7