Publicité
Les langues disponibles
Les langues disponibles
3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the
bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the locked position.
5. Close the oven door.
REMOVING AND REPLACING THE STORAGE DRAWER
Turn the power OFF before removing the warming drawer.
How to remove the storage drawer
1. Pull out the drawer until it stops
2. Locate the locking clips near the back of each full-extension roller guide rail. Using two hands,
push down on the left clip and lift up on the right clip to release the clips. Pull the drawer the
rest of the way out.
Left drawer
locking clip
3. Clean the drawer in warm, soapy water. Rinse and dry thoroughly.
How to replace the storage drawer
1. Position the ends of the full-extension roller guide rails of the side rails of the drawer opening.
2. Push in the drawer to close it and snap the locking clips into place.
61_ Maintaining your appliance
NE595R1ABSR_AC_DG68-00435A-03_EN.indd 61
Hinge lock
Unlocked position
Right drawer
locking clip
Right roller guide rail
Locked position
2013-05-23
5:59:57
Publicité
