Fridja f1500 Mode D'emploi page 14

All manuals and user guides at all-guides.com
D E S CALI NG MO DE
We recommend you descale your steamer at least once every 2
months dependent on use. There is a button on the steamer head
that switches the f1500 into descaling mode from steaming mode.
Use this to clean the steamer head of unwanted mineral deposits
from hard water.
1. Fill the water tank.
2. Plug in the f1500 and turn the power switch on.
3. Press the button on the back of the handle to activate descaling mode.
When the button is out, it is in descaling mode. When the button is in, the
f1500 is in steaming mode/operation mode.
4. Prepare an area for the built up deposits to go,
such as a sink or large bucket.
5. When the steam pressure reaches
4 Bar or the steam indicator is on, press
the steam trigger aiming into a sink or bucket.
6. Cleaning process completes when there
is no more built up mineral water coming out
from the steam head, it takes up to 4 or 5 minutes.
7. Turn off descaling mode at the handle. The
f1500 will be ready to work after 1 minute.
CAUTION:
Depending on the water you use, minerals and sediment may collect in the
steamer and affect the free flow of steam. To reduce this, we recommend
using demineralised or distilled water.
Do not immerse the appliance in water or any other liquid.
14
ENGLISH
Descaling mode button