Publicité
Les langues disponibles
Les langues disponibles
SERIES RECORDING
This is a convenient function in which when two or more VCRs are
connected. The second unit starts recording when the tape on the first unit
reaches the end.
Connecting
method
Refer to the
connection
method for
series recording
(page 38)
REFERENCE
RESET button
• Use this button when the VCR or
display does not operate normally even
though the power is turned on.
• The RESET button is on the right side of
the Front Panel.
• Press the RESET button using a ball
point pen or a pencil.
31
All manuals and user guides at all-guides.com
Operating
method
• Select No. 4 in the MENU
• Select "ON" for SERIES
❷
❷
using the SHIFT
and
button.
When pressing the RESET button
• All the entered information such as reserve recording set
time, current time, and alarm information is erased.
• The power is turned off, and there is no picture at all. When
the power is turned on again,
display of the screen.
• The current time is erased and must be reset.
Description
of operation
• When the tape in the first unit
ends during recording, the second
❿ ❿
unit begins recording. When the tape
in the second unit ends during
recording, the next unit begins
recording if connected.
• When the series recording mode
is selected, the second unit
performs recording even if the
power is turned off.
• If a constant alarm sounds clear it by
pressing any key.
2005-1-1 SAT
12:00:00 L 6H
flashes on the
Publicité
