Inakustik HDMI Matrix Mode D'emploi page 16

OPERATING MANUAL
Detection Mode
Mode 1
Video & Audio
H.C.F. (Highest
Common Factor )
※ Preset Mode
Mode 2
Video Maximum &
Audio H.C.F.
Mode 3
Video H.C.F. &
Audio Maximum
Mode 4
Video & Audio
Maximum
Mode 5
Video H.C.F. &
Audio Specified
(AAC, Dolby 5.1,
DTS 5.1, and 2 CH)
16
Mode 6
Video Maximum &
Audio Specified
(AAC, Dolby 5.1,
DTS 5.1, and 2 CH)
Mode 7
Reserved
Mode 8
Priority of Output A
Mode Action
Select the output audio and video signal
to the highest format which can be
supported by both of the sink devices.
(For example, when the sink devices of
Output A and Output B support different
video and audio formats, the highest
format of Output A is 1080p/12-bit & 2
channels, the other sink device of
Output B supports the highest format to
1080i/8-bit & 2 channels, under Mode
1, it will automatically detect and
choose 1080i/8-bit & 2 channels as the
output standard.)
Video: Select the output video signal to
the highest video format which
supported by Output
A or Output B sink devices. (For
example, the highest video format of
Output A is 1080p/12-bit, the other sink
device of Output B supports the highest
format to 1080i/8-bit, under this Mode,
the source
device will automatically detect and
choose
1080p/12-bit as the output standard.)
[Notice 1]
Audio: Select the output audio signal to
the highest audio format that supported
by both of the sink devices.
Video: Select the output video signal to
the highest format that supported by
both of the sink devices (Output A &
Output B).
Audio: Select the output audio signal to
the highest audio format which
supported by one of the connected
devices. (For example, the highest
audio format of Output A is Dolby 5.1,
the other sink device of Output B
supports the highest format to 2 CH,
under this Mode, and it will detect and
choose Dolby 5.1 as the output
standard.) [Notice 2]
Select the output video and audio signal
to the highest format that supported by
Output A or Output B sink devices.
[Notice 3]
Video: Select the output video signal to
the highest format that supported by
both of the sink devices (Output A &
Output B).
Audio: Set the output audio signal as
one of the following 4 standards: AAC,
Dolby 5.1, DTS 5.1 or 2 CH. If the audio
format of coaxial/optical cable
connected source device is AAC, the
output audio standard will be AAC as
well. [Notice 4]
Video: Select the output video signal to
the highest video format which
supported by Output A or Output B sink
devices. [Notice 3]
Audio: Set the output audio signal as
one of the following 4 standards: AAC,
Dolby 5.1, DTS 5.1 or 2 CH. If the audio
format of coaxial/optical cable
connected source device is AAC, the
output audio standard will be AAC as
well. [Notice 4]
The mode will remain the same
functions as Mode 1.
The highest format of Output A
connected device will be chosen for the
primary output video and audio signal
standard. [Notice 5]
Recommended Application
TV wall application, sports bar
application, or other application
that different standard
(Resolution, Color Deep) HDTVs
are connected together.
Home Theater application; Two
rooms application; When the
source needs to be shown with
the best resolution, and the audio
standard that supported by both
of two sink devices will be the
primary option for audio output
signal.
Home Theater application; Two
rooms application; When the
source needs to be presented
with the best sound quality, and
the highest video format that
supported by both of two sink
devices will be the primary option
for video output signal.
Home Theater application; Two
rooms application; When the
source needs to be displayed
with the best resolution and
sound, the highest format will be
chosen for the video & audio
output signal.
Home Theater application;
Traditional audio amplifier may
only support Toslink or coaxial
for audio input connection,
please use the Toslink or Coaxial
connector for audio output
connection. Under this mode, the
better sound quality of amplifier
can be designated as the output
audio standard.
Home Theater application;
Traditional audio amplifier always
used Toslink or coaxial cable
instead of HDMI cable for
connection, under this mode, the
better sound quality of amplifier
can be designated as the output
audio standard.
The applications of this mode are
same as Mode 1.
Home Theater application, or
user assigns a primary sink
device by connect it to port 1.