Connection & Operation - Inakustik HDMI Matrix Mode D'emploi

CONNECTION & OPERATION
CONNECTION
1. Connect the DC 5V power adaptor to the HDMI Matrix Switcher
2. Connect the HDMI cables from the HD sources (PS3, DVD player, Blue-ray Player...etc) to the input
ports of the HDMI Matrix Switcher
3. Connect the HDMI cables from your HD display (HDTV or projector) to the output port (Port A or
Port B) of the HDMI Matrix Switcher.
※ Output Port A supports additional SPDIF digital audio output. If your Home Theater (or Sound
System) doesn't support HDMI input, you can use a coaxial/optical audio cable to connect the digital
audio to your Home Theater (or Sound System).
4. After you finish the connection, the Active-A (or Active-B) indication LED (red), and input indication
LED (green) will be lighted on
OPERATION
MATRIX MODE
Individual Selection for each output port
SPLITTER MODE
Sharing same HD source to both outputs
A. If source devices do not support the function of Auto Detection & Auto Adjustment, please
set the output audio and video signal of the source device first, and make sure the setting can be
supported by the sink devices. For example, if user set the source to send out a 1080p video signal,
but the sink device can only support up to 720p or 1080i, you will not have picture the sink device.
B. If source devices support the function of Auto Detection & Auto Adjustment, the source device
will auto adjust the output audio and video signal to the optimal standard based on the following 8
different modes. Users can also set the audio/video output signal by themselves. Please make sure
the setting can be supported by the sink devices.
MODE D'EMPLOI
OPERATING MANUAL
15