cecotec Outsider DemiGod Makalu Mode D'emploi page 19

NOTE: after each adjustment, tighten the locknut.
TIGHTENING THE CHAIN
Check periodically the transmission chain's tension and keep it clean of deposited dirt. To
tighten or loosen it:
1. Loosen nut A and turn nut B to restore the correct chain tension.
2. Repeat this step on the same nut located on the opposite side.
3. Check the wheels are aligned and tighten nut A.
A
B
ADJUSTING THE HEIGHT OF THE SADDLE
To adjust the height of the saddle, unlock lever 1, lower or raise the saddle to the desired
position. Once the saddle is placed at the desired height, lock lever 1 back.
36
All manuals and user guides at all-guides.com
ELECTRIC SCOOTER ASSEMBLY (APPROVAL KIT)
1. Parts and components
Seat support
Main body
Speedometer bracket
License plate holder
2. Before use
•
•
Saddle
Charger
Speedometer
Tool kit Rear-view mirror
Take the product out of the box and remove all packaging materials.
Make sure all parts and accessories are included and in good conditions. If not, contact
immediately the Technical Support Service of Cecotec.
Instruction manual
Headlight bracket
Rear fender bracket
License plate bracket with
light
37