Publicité
Les langues disponibles
Les langues disponibles
- To exit setup mode -
•
Press the SETUP/MENU or EXIT button on the remote control.
SETUP OFF appears on the display and Setup Mode is exited.
Setting the Speaker
SPEAKER
FRONT (Front)
CENTER (Center)
SURR (Surround)
SBACK (Surround Back)
FRONTH (Front Height)
SUBW (Subwoofer)
CROVR (Crossover Frequency)
•
LARGE : Select when using large speakers. You can listen to full range sound.
•
SMALL : Select this when using small speakers.
•
NONE : Select when no speaker is used.
•
YES (subwoofer) : Select when using the subwoofer speaker.
•
NO (subwoofer) : Select when not using the subwoofer speaker.
•
CROVR : Select the crossover frequency for the best bass response in your speakers.
✎
NOTE
You can also use the SETUP, ,,., ENTER, RETURN buttons on the front of your AV Receiver.
When the Front speaker is only set to LARGE, you can select LARGE of other speakers.
When the Surround speaker is set to LARGE, you can select LARGE of SBACK (Surround Back)
speaker.
When the 7.1 CHANNEL is set to PLIIz, you can not select NONE of surround speaker and front
height speaker.
You can also change the crossover frequency by using the CROSS OVER,
remote control.
HW-D600_D650S_XAC_0614.indd 33
HW-D600_D650S_XAC_0614.indd 33
All manuals and user guides at all-guides.com
Possible Settings
LARGE, SMALL
LARGE, SMALL, NONE
LARGE, SMALL, NONE
LARGE, SMALL, NONE
LARGE, SMALL
YES, NO
60, 80, 100,120, 150, 180, 200(Hz)
Default Setting
SMALL
SMALL
SMALL
NONE
SMALL
YES
100Hz
<
>
,
buttons on the
33
English
2011-06-17
2011-06-17
10:35:19
10:35:19
Publicité
