Publicité
Les langues disponibles
Les langues disponibles
Connections
Using Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's
remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an
HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support
Anynet+.
1.
Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 17)
2.
Set the Anynet+ function on your TV.
(See the TV instructions manual for more information.)
•
You can operate the volume on the AV receiver by using Volume buttons on the TV remote
control.
To Turn on Anynet+
1.
Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches between INPUT and SETUP OFF.
2.
Press the ▲▼ buttons to select OPTION, and then press the ENTER button.
3.
Press the ▲▼ buttons to select HDMI SETUP, and then press the ENTER button.
4.
Press the ▲▼ buttons to select HDMI ANYNET+, and then press the ENTER button.
5.
Press the ▲▼ buttons to set ANYNET+ to ON, and then press the ENTER button.
To exit setup mode
•
Press the SETUP/MENU or EXIT button on the remote control.
SETUP OFF appears on the display and Setup Mode is exited.
✎
NOTE
If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV
receiver using the TV's remote control. This function is available only in connection with Samsung
TV and DVD player supporting Anynet + (HDMI-CEC).
Please check your TV for the ANYNET+ logo. If your TV has an ANYNET+ logo, then it supports
the Anynet+ function.
When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+
installed). Otherwise, it can cause a malfunction.
18
English
HW-D600_D650S_XAC_0614.indd 18
HW-D600_D650S_XAC_0614.indd 18
All manuals and user guides at all-guides.com
HDMI Function
2011-06-17
2011-06-17
10:34:51
10:34:51
Publicité
