Setting The Date And Time - Omron R3 Mode D'emploi

2. Preparation

2.2 Setting the Date and Time

1.
Set the monitor to the correct date and time before taking
a measurement for the first time.
Press the
2.
Press the O/I START button to store the setting.
Notes:
• To reset the date and time, hold down the
• If the batteries have been removed for 30 seconds or more, the date and time setting will
need to be reset.
• If the date and time are not set, "-:--" appears during or after measurement.
button.
1)
Push the button to
change.
• Hold down to advance
the digit rapidly.
2)
Push the button to
confirm.
Next setting appears.
Year
Month
Day
Hour
button while the power is off.
EN
Minute
5