Kohler K-110 Instructions D'installation page 8

Minimum 1/2"
Plywood
Support
Framing
11-3/8"
(28.9 cm)
Supply Ells
1/2"
Copper
Tubing
5. Wall-Mount Supply Installation
Determine the faucet installation location.
Install support framing at the installation location as shown.
Secure the piping to the framing.
Install temporary plugs in the supply ells.
Turn on the water supplies and check for leaks.
Turn off the water supplies.
Complete the finished wall.
In the finished wall, drill two 1" (2.5 cm) holes measuring 8"
(20.3 cm) apart from the center of each hole.
Drill a 1/2" (1.3 cm) hole at the exact location illustrated. This
hole must be through the plywood support.
Remove the temporary plugs from the water supply ells.
1008209-2-G
All manuals and user guides at all-guides.com
This hole must be centered,
and must be through
plywood support.
1/2" (1.3 cm)
Diameter Holes
8" (20.3 cm)
Center-to-Center
1" (2.5 cm) Diameter Holes
8
11-3/8"
(28.9 cm)
Kohler Co.