Publicité
Les langues disponibles
Les langues disponibles
Bonnet
Open
Close
Shown in Closed Position
11. One-Piece Lever Handle Installation
Verify that the valves are in the closed position.
Insert the handle onto the stem extension so the handle is
positioned horizontally.
Verify that the handle is in an even horizontal position. If needed,
remove the handle and adjust its position on the splines of the
stem extension until horizontal. For fine adjustment, pull out the
stem extension until it disengages from the valve, rotate, and
return it to its original position. Do not pull the stem extension
completely out.
NOTICE: Risk of product damage. Do not overtighten.
Overtightening will damage the handle.
Insert the stem screw into the stem extension and tighten with a
screwdriver.
Repeat for the other handle.
1008209-2-G
All manuals and user guides at all-guides.com
Lever
Handle
Stem
Screw
Stem
Extension
Hot
Cold
Open
Close
14
Kohler Co.
Publicité
