Kohler K-110 Instructions D'installation page 15

Bonnet
Open
Close
Shown in Closed Position
12. Six Prong Handle Installation
Verify that the valves are in the closed position.
NOTICE: Risk of product damage. Do not overtighten.
Overtightening will damage the handle.
Insert the stem screw into the stem extension and tighten with a
screwdriver.
Loosen the setscrew.
Position the handle assembly on the stem extension.
Verify that the handle label is in an even horizontal position. If
needed, remove the handle and adjust its position on the splines
of the stem extension until horizontal. For fine adjustment, pull
out the stem extension until it disengages from the valve, rotate,
and return it to its original position. Do not pull the stem
extension completely out.
Tighten the setscrew.
Repeat for the other handle.
Kohler Co.
All manuals and user guides at all-guides.com
Stem
Extension
Setscrew
Stem
Six Prong
Screw
Handle
Open
Close
15 1008209-2-G