Publicité
Les langues disponibles
Les langues disponibles
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode press and
hold simultaneously
the indicators
blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting:
3. Press
= Acoustic signal on.
4. Press the on/off button to confirm
the setting.
6.6 How to set the colour of
the TimeBeam
The appliance must be in programme
selection mode.
7. OPTIONS
,
,
start to flash and the display is
,
go off.
continues to
= Acoustic signal off.
to change the setting.
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
1. To enter the user mode, press and
2. Press
and
until
,
and
,
and
3. Press
4. Press the on/off button to confirm
hold simultaneously
the indicators
,
start to flash and the display is
blank.
.
• The indicators
go off.
• The indicator
flash.
• The display shows a number and
the letter C. Each number refers
to a different colour.
–
= TimeBeam
deactivated.
again and again to
change the colour.
• You can see the different colours
on the kitchen floor.
the setting.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
ENGLISH
33
and
until
,
,
and
,
,
and
continues to
Publicité
