Linkoln Electric Magnum PRO 100SG Manuel De L'opérateur page 9

MAGNUM PRO 100SG
aSSEMBlY OF INSIDE ITEMS
1. Liner Assembly: Includes a gas seal with the cable connector
and is the outgoing wire guide.
2. Drive Roll: This Drive Roll feeds all specified aluminum wires.
3. Idle Roll Assembly: Non-adjustable tension setting for all
specified wires
4. Incoming Wire Guide: Highly wear-resistant.
5. P6 Connector Control Leads: Motor Power and Trigger. (See
Maintenance Section for more details)
6
5
FIGURE A.3
2
1
8
A-3
6. Welding Power and Shielding Gas Machine connection
(Sealed with 2 o-rings).
7. Locking Knob: Independently retains the wire spool on the
spindle.
8. Only 4 sub-assemblies: gun tube; cable; wire drive; trigger.
9. Conical spring serves as the spool brake (use only with
aluminum alloy 5356).
3
7
4
2
INSTALLATION
9