Linkoln Electric Magnum PRO 100SG Manuel De L'opérateur page 7

MAGNUM PRO 100SG
INSTALLATION
K4360-1 - Magnum PRO 100SG Spool Gun
TECHNICAL SPECIFICATIONS -
Aluminum GMAW (MIG), DC electrode positive
Welding Process
polarity with 100% argon welding shielding
gas.
Wire Alloys
Aluminum only: alloys 4043 or 5356
Wire Sizes
Solid wire 0.030 or 0.035 inches
(Diameters)
(0.8 or 0.9 mm)
Spool Size
1 lb. weight, nominal 4 inch diameter spool
Rated Welding
Current and Duty
130 amps at 30% for 10-minute basis
Cycle
Overall Weight
3.5 lbs. with cable but without case or spool
Cable Length
10.0±0.2 feet
Overall Size
In inches: 15.75 long x 10.50 high x 4.25 thick
(bounding box)
max., without case or gun cable.
Method of Guidance
Semiautomatic (manually-guided)
Method of Cooling
Air-cooled
PRODUCT DESCRIPTION
• Reliable, low-price aluminum welding accessory for novice
and experienced welders.
• Completely enclosed system.
• All combinations of specified aluminum alloys and wire
diameters can be fed with the same drive roll and liner
assembly.
• Gun cable compactly integrates welding current and gas
supplies with gun control functions.
• Uses reliable gun and feeder hardware from Lincoln's
Magnum ® PRO 100L Gun.
UNPaCkINg ThE SPOOl gUN
The spool gun is factory-assembled and tested, and then packed
in its own carrying case. It is shipped fully-equipped to weld with
0.035 inch diameter aluminum wire. After opening the case,
check that it contains the following items:
1. One fully assembled K4360-1 spool gun.
2. One T11862-65 Conical Compression Spring for use with alloy
5356 wire (spool not included).
3. One spool of 0.035 aluminum alloy 4043 wire
4. Three 0.035 contact tips
5. One instruction manual
1
4
A-1
INSTALLATION
2
3