Power On The Instrument; Manual -Function - QEO ECOLINE EL 607 Mode D'emploi

EN

POWER ON THE INSTRUMENT

3
Set ON/OFF knob in position „ON" . Instrument is now ready for use (POW-
ER LED is illuminated). An audible and optical (blinking lines) alarm indica-
tes if the instrument was set up outside of compensator rage of ± 3,5 °.
Set up instrument on a more even surface.
To switch off instrument bring ON/OFF knob into position „OFF" . Instru-
ment is now switched off and the compensator is blocked to avoid dama-
ges during transport.
NOTE: During transport ON/OFF knob (compensator clamp) no. 3 must be
set to „OFF" . Disregard may lead to damage of compensator.
The laser lines can be switched on and off independently of each other or
together:
Line H Line V1 Line V2 All lines

MANUAL -FUNCTION

MANUAL -function is only available in OFF-mode (as otherwise compensa-
tor alarm would start). Press MANUAL key (3) (MANUAL LED is blinking)
and choose desired laser lines. Now EL 607 can be used in slope position.
Press MANUAL key again to switch off the instrument.
13
ECOLINE