Mounting The Lens - Sony ExwaveHAD DXC-390 Mode D'emploi

Mounting the Lens

Mounting the VCL-610WEA Zoom Lens
Lens control cable
2
2
1
3
1
1
Remove the mount caps of the camera and lens.
2
Align the threaded portion of the lens mount with that of
the camera mount, and slowly rotate the lens clockwise
to fix to the camera.
3
Connect the lens control cable to the LENS connector
on the camera.
To adjust the position of the lens
After fixing the lens to the camera, rotate the lens further
clockwise. When the lens mount is slipped, rotate the lens in
the desired direction.
Chapter 3 Installation and Connections
43
(GB)