Adjusting The White Balance - Sony ExwaveHAD DXC-390 Mode D'emploi

Adjusting the White Balance

Each time the lighting condition changes, be sure to adjust
the white balance so that optimum color reproduction is
obtained.
2
1, 3
MENU BLACK
FILE
WHITE
SELECT
7 2
BARS button
BARS
ENTER
Operation procedure
1
Press the MENU button to display the MAIN menu.
2
Select the WHITE BALANCE menu, and set MODE to
AWB.
<WHITE BALANCE> [A]
>MODE AWB
+ _
R. PAINT
+ _
B. PAINT
Select Back
MENU
For menu operation, see "Operation through Menus
(Menu operation procedure)" on page 14.
3
Press the MENU button twice to remove the menu.
4
Display the camera image on the monitor screen.
Note
If a color bar signal is displayed on the screen, press the
BARS button to turn it off.
5
Set the lens iris control as follows:
When using an auto-iris lens: Set to auto-iris control.
When using a manual-iris lens: Set to an appropriate
iris opening value.
0
0
(Continued)
39
Chapter 2 Operation (GB)