Sony ExwaveHAD DXC-390 Mode D'emploi page 30

Adjusting and Setting with Menus
SCENE FILE menu
Sets the preset menu settings.
The camera has two memory files (A or B) for storing the
menu settings. You can store a different type of setting into
each file, and switch to the file most suitable for the
shooting conditions quickly. The currently selected memory
file is shown in the upper right corner of the on-screen
menu.
<SCENE FILE>
>FILE SELECT
LOAD
Select
Setting items in the SCENE FILE menu
Setting item Contents of setting
FILE SELECT Selects the file into which you store
the setting.
LOAD Selects the type of setting to be
stored, and loads it.
30
(GB) Chapter 2 Operation
[A]
A
Back
MENU
Ref. page
30
30
FILE SELECT
Selects the file A or B.
LOAD
Sets the setting to be stored into the file which you select
with FILE SELECT, and stores the setting.
Selection Type of setting
STANDARD Suitable for a camera used as a permanent fixture.
MICROSCOPE
Suitable for a camera for a microscope.
FULL AUTO Automatically adjusts settings.
STROBE Suitable for stroboscopic shooting.
FILE B (or A) When copying the settings between two files.
Storing the setting
1
Select A or B into which the setting is stored in the
FILE SELECT setting.
2
V v
Press the or button to select LOAD.
3
B b
Press the or button to select the desired setting to
be stored, and press the ENTER button.
"Overwrite OK?" appears.
4
Press the ENTER button.
If you do not want to store the setting, press the MENU
button.