JVC Everio GZ-VX815 U Guide De L'utilisateur page 9

Still Image Recording
Check if the
recording mode is
B still image.
If the mode is A
video, tap A on the
touch screen, then
tap B to switch.
Image stabilization only starts when the button is pressed halfway.
0
You can also tap Q on the touch screen to record. However, focus cannot be set by pressing halfway.
0
Playing Back/Deleting Files on this Unit
Select and play back the recorded videos or still images from an index screen (thumbnail display).
Tap A or B to select the video
or still image mode.
Tap F on the touch screen
to select the playback mode.
Tap E to return to the
recording mode.
Tap on the file to play back.
Tap e to pause playback.
Tap u to return to the video
index screen.
.
To capture a still image during playback
o
Pause the playback and press the SNAPSHOT button.
NOTE
While this unit may be used with the LCD monitor reversed and closed, the
0
temperature rises more easily. Leave the LCD monitor open when using this
unit.
The power may turn off to protect the circuit if the temperature of this unit rises too much.
0
Set the focus on the subject.
Take a still image.
PLAY
Press halfway
Lights up in green when
focused
Press fully
Lights up during still
image recording
Volume adjustment during playback
Turn down Turn up the
the volume volume
To delete unwanted files
Tap R.
Tap on the files to delete.
A delete mark appears on the selected file.
To remove the delete mark, tap again.
DELETE
SEL ALL REL ALL SET
Tap "SET".
Tap "EXECUTE" when the
confirmation message appears.
Tap "OK".
QUIT
9